TUBING

This tubing is used to extend your drip/micro sprinkler coverage from your mainline (½” tubing). It is connected to ½” tubing with a ¼” barbed connector. Recommended to use no more than 30 ft. from main line.

This tubing is used to extend your drip/micro sprinkler coverage from your mainline (½” tubing). It is connected to ½” tubing with a ¼” barbed connector. Recommended to use no more than 30 ft. from main line.

This tubing is usually used as the main line for your irrigation system. It can be used above or just below the surface. Recommended to use no more than 300 ft. from water source. (620" x 710")

This tubing is usually used as the main line for your irrigation system. It can be used above or just below the surface. Recommended to use no more than 300 ft. from water source. (620" x 710")

This tubing is usually used as the main line for your irrigation system. It can be used above or just below the surface. Recommended to use no more than 300 ft. from water source. (620" x 710")

This ¼” tubing has built-in emitters spaced every 12” inches. The emitters are 0.5 GPH. Recommended to use no more than 30 ft. from main line.

This ¼” tubing has built-in emitters spaced every 12” inches. The emitters are 0.5 GPH. Recommended to use no more than 30 ft. from main line.

This ¼” tubing has built-in emitters spaced every 6” inches. The emitters are 0.5 GPH. Recommended to use no more than 20 ft. from main line.

This ¼” tubing has built-in emitters spaced every 6” inches. The emitters are 0.5 GPH. Recommended to use no more than 20 ft. from main line.

This brown ½” tubing has built-in pressure compensating emitters spaced every 12” inches. The emitters are 0.5 GPH. Recommended to use no more than 300 ft. from water source.